Switched ATS | Dual 32A IEC 60309 inputs | 16 x C13 + 2 x C19 | Network managed
The CyberPower PDU44302 is a switched automatic transfer switch (ATS) with two 32A IEC 60309 inputs, two outlet banks and 18 outlets (16 x IEC C13 and 2 x IEC C19). It installs in a standard 19-inch rack or enclosure using the included mounting brackets.
Key Features at a Glance
- Input - IEC 60309 32A x 2 (dual inputs)
- Outlets - 18: IEC C19 x 2, IEC C13 x 16
- Maximum input current - 32A
- Automatic transfer - switches to the alternate source in under 10 ms total transfer time
- Outlet switching - turn individual outlets on, off or reboot them remotely
- Colour LCD - shows input voltage, current and power consumption; hot-swappable module
- Remote management - web interface, SNMP and PowerPanel software, with email and SNMP event alerts
- Environmental monitoring - supports CyberPower's optional temperature and humidity sensor
Full Technical Specifications
| Brand | CyberPower |
|---|---|
| Manufacturer part number | PDU44302 |
| Product type | Switched ATS |
| Phase | Single Phase |
| Dual Power Inputs | Yes |
| Nominal Input Voltage | 200 - 240 Vac |
| Input Frequency | 50 / 60 Hz |
| Maximum Input Current | 32 A |
| Input Connector Type | IEC 60309 32A x 2 |
| Power Cord Length | 3.05m |
| Output Voltage | Depends on Input |
| Overload Protection | Circuit Breaker |
| Over Current Protection (Each Bank) | 20 A |
| Outlets - # of Bank(s) | 2 |
| Outlet(s) - Total | 18 |
| Outlet(s) - Rear | 18 |
| Outlet Type | IEC C19 x 2 | IEC C13 x 16 |
| Remote Individual Outlet Control | Yes |
| LCD Information Display | Input Voltage (Volts) | Input Frequency (Hz) | Current Level (Amps) | Power Consumption (Kilowatts) | Network Information | Serial Number | Environment Status | Hardware Version | Firmware Version |
| Hot-swappable LCD Module | Yes |
| LCD Setting & Control | Preferred Source | Source Configuration | Load Configuration | Outlet Control | LCD Settings | Reset / Reboot |
| LED Indicators | PDU Status | Source Status | Load | Tx/Rx | Link | Outlet |
| A-type USB Port | Yes |
| Connectivity Port | RJ45 | RJ45 (for Serial) | RJ45 (for ENVIROSENSOR/ Daisy Chain (In)) | RJ45 (for Daisy Chain (Out)) |
| Environmental Sensor Supported | Yes |
| User-upgradeable Firmware | Yes |
| Power Management Software | PowerPanel Business (Recommended for small-medium scale management) | PowerPanel Enterprise (Recommended for large scale management) |
| Supported Protocols | IPv4/v6 | SNMPv1/v3 | HTTP/HTTPs | TCP/IP | UDP | DHCP | NTP | DNS | SMTP | SSH | SSL | TLS | Telnet | FTP | and Syslog |
| Authentication | RADIUS | LDAP | LDAPS | Windows AD |
| Installed Rack Height | 2 U |
| Form Factor | 2U Horizontal Rackmount |
| Enclosure Construction | Steel |
| Cord Retention Tray | Yes |
| IEC Receptacle Locking | Yes |
| External Site Ground Pin | Yes |
| Adjustable Mounting Brackets | 1 Set |
| Dimensions | 433 x 88 x 215mm |
| Weight | 7.8kg |
| Certifications | CE | FCC Class A | UL62368 | EN 55032 Class A | IEC 62368 | RoHS |
Where It Fits
An ATS gives single-corded equipment a redundant feed from two power sources, and the switched outlets can be controlled individually over the network. The 32A inputs need dedicated 32A circuits installed by a licensed electrician.
Choosing the Right Model
Choose an ATS when equipment has only one power cord but you have two power sources (for example two UPS units, or a UPS and mains). Match the ATS input rating and plugs to both sources.
Buy the CyberPower PDU44302 at Tech2UDirect
Order the CyberPower PDU44302 transfer switch online at Tech2UDirect. If you need help confirming it suits your equipment, contact our team with your model numbers before you order.
- SKU:
- PDU44302
- Brand:
- CyberPower